Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ES Windows Windows & Doors: The Orange County Owner’s Guide
We stock and install ES Windows-compatible windows and doors throughout Orange County, with most replacements running $450 – $1,800 per window or door installed, depending on size, series, and what failed. Same-day and next-day appointments are available for most standard ES Windows hardware and glass swaps. Most owners catch the problem when a door starts binding in the frame, a window won’t stay open, or a seal has gone cloudy between the panes.
ES Windows builds their frames and sashes to specific tolerances, which matters when you’re replacing a roller, a latch, or an entire sash. A generic part from a big-box store will usually fit poorly and wear out fast. We keep the common ES Windows-compatible hardware on our trucks when we roll into Anaheim Hills, Huntington Beach, Irvine, and the rest of Orange County, so the first visit is usually the only visit.
Key takeaways:
- Installed replacement cost for the average ES Windows window or door part: $450 – $1,800
- We match the part to your specific ES Windows model and series before we arrive
- Every job gets a written price before work starts, and a full-year guarantee under our 365-Day Done Right Promise
- Bradford Remodeling Co Orange County is an independent service provider, not affiliated with ES Windows
Which ES Windows Models This Applies To
ES Windows has produced several series over the years, and the hardware is not universal across all of them. The most common lines we service in Orange County are the ES 5000, ES 7000, and ES 9000 series, along with their sliding door counterparts. Older ES Windows installs, particularly in tract homes built in the 1990s and early 2000s around Lake Forest and Mission Viejo, often have rollers and latches that are no longer in production.
Here’s the compatibility gotcha we see most often: a homeowner reads “ES Windows” off the frame and assumes the replacement roller set is one-size-fits-all. It isn’t. ES Windows changed the roller housing diameter between series, and mixing them up means the door will either sit too high in the track or drag on the sill. The right way to identify your part is to look at the etched label on the glass or the frame edge, which typically lists the series and the date of manufacture. If that’s worn off, we measure the roller housing and the sash thickness on-site before ordering anything.
On the OEM-versus-aftermarket decision: for rollers, latches, and weatherstripping, quality aftermarket equivalents from brands like Truth Hardware and Prime-Line often match or exceed the original, and they cost less than OEM. For glass packages and full sashes, OEM ES Windows replacement units are the safer call because the glass coating and spacer match the rest of the house. We carry both options and will give you a straight number for each before you decide.
Styles & brands we work with
Signs Your ES Windows Windows & Doors Is Failing
- The sliding door is hard to move or grinds along the track. The rollers under the door have flat-spotted or seized. In Orange County’s dry, dusty months, grit works its way into the roller housing and wears the bearings down, so the door starts dragging instead of gliding.
- The window won’t stay up or slowly slides shut on its own. The spiral balance or block-and-tackle balance inside the frame has lost tension. This is common on double-hung ES Windows after 15-plus years, especially in coastal areas where salt air accelerates spring and hardware corrosion.
- The latch doesn’t catch or feels loose when you lock it. The strike plate has shifted or the latch tongue has worn down. You’ll notice it most on patio doors in newer Irvine and Tustin homes where the slab has settled slightly.
- Fogging or moisture between the glass panes. The insulated glass seal has failed. This happens faster on ES Windows units that face direct afternoon sun, which is a big chunk of Orange County homes with western exposures.
- The frame corner is pulling apart or the mitre joint has opened up. The corner key inside the frame has cracked, usually from thermal expansion and contraction over years of hot Santa Ana summers and cool winter nights.
Replacement Cost & What’s Included
Here’s what we charge to replace ES Windows-compatible windows and doors in Orange County, parts and labor together:
| Service | Typical Installed Price Range |
|---|---|
| Roller replacement on a sliding patio door | $450 – $800 |
| Window balance replacement (per window) | $350 – $650 |
| Latch and lock replacement | $250 – $500 |
| Weatherstripping and seal replacement | $200 – $450 |
| Full sash replacement | $1,200 – $1,800 |
| Insulated glass unit replacement | $600 – $1,200 |
The range depends on three things: the series of your ES Windows unit, whether we’re replacing the part or the entire sash, and how much finish work is needed around the frame after the swap. The price on that table is the price we put in writing. No numbers move at the door.
Every replacement we install carries our 365-Day Done Right Promise: if the repair fails inside a full year, Bradford Remodeling Co Orange County comes back and corrects it at no charge. You get that guarantee in writing when the job closes, along with a clean site and the old parts bagged and set aside unless you tell us to haul them off.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
There are a few things an owner can safely check before picking up the phone. Look at the track. If it’s full of dirt and pet hair, clean it out and see if the door moves better. Check the latch plate screws and tighten them if they’re loose. That’s about where the safe territory ends.
Replacing rollers on an ES Windows sliding door means lifting a glass panel that can weigh 80 pounds or more, and if you get the housing wrong, the door can drop and hurt someone or shatter on the sill. Window balances hold tension, and opening the sash with a failed balance can surprise you with a moving panel. We won’t tell you to try it yourself. We’ll tell you this: call us at (562) 262-2907, and Curtis Lane or one of our background-checked, uniformed techs will show up, identify the part, and give you a written price before any work starts.
FAQs
Rollers and latches on ES Windows units in Orange County typically last 12 – 20 years, with coastal homes seeing shorter lifespans due to salt air, and inland homes seeing faster seal failure due to intense sun and heat. Insulated glass units often fail within 15 – 25 years when exposed to direct western sun.
Some parts, like latch strike plates and tracks, can often be adjusted or cleaned rather than replaced. Rollers, balances, and failed insulated glass cannot be repaired and must be replaced. We’ll tell you which category your part falls into before recommending any work. Call (562) 262-2907 for an exact answer on your unit.
Most roller, latch, and balance replacements take 45 – 90 minutes per window or door, and we complete the majority of jobs in one visit since we carry common ES Windows-compatible hardware on the truck. Full sash or insulated glass replacements usually require a second visit after the replacement unit arrives.
We stock common ES Windows-compatible rollers, latches, balances, and weatherstripping on our trucks for the series we service most in Orange County. Specialty glass packages and full sashes are ordered from ES Windows or a certified fabricator, which usually adds three to ten days. Either way, the price is on paper before the order goes in.
Why Orange County Homeowners Call Bradford Remodeling Co
We’re part of the Garrison Partners family, which was established in 2004 and operates every location under The Garrison Standard: written prices before work starts, live-person phone coverage 24/7, and background-checked, uniformed technicians on every job. That standard is the reason we can hand you a written quote and a signed guarantee before we touch your windows or doors.
Curtis Lane grew up in East Los Angeles and learned residential construction at Los Angeles Trade-Technical College before running crews across Orange County for well over a decade. He’s seen ES Windows units in Anaheim Hills track homes and full custom installs near Balboa Island. His framing crews don’t leave until the walls are plumb and the corners are square, and our parts techs operate on the same standard: straight number, clear scope, no surprises at final invoice.
We also carry and install parts and materials from KraftMaid, Cambria, and Silestone when window or door work connects to a larger kitchen or bath project. If you need an ES Windows part matched, priced, and installed right, call (562) 262-2907 to schedule your free estimate.
Written by Curtis Lane, Owner, Bradford Remodeling Co – Orange County at Bradford Remodeling Co Orange County, serving Orange County and nearby areas.
